Philips Sonicare 3 Series User Manual page 11

Easy-start
The Easy-start feature gently increases power over the first 14 brushings
to let you get used to brushing with the Sonicare.
The Easy-Start feature only works at the High intensity level.
This Sonicare model comes with the Easy-start feature deactivated.
To activate or deactivate the Easy-start feature:
1 Attach your brush head to the handle.
2 Place the handle in the plugged-in charger.
3 Activate or deactivate Easy-start:
To activate Easy-start: Press and hold the power on/off button for
,
2 seconds. You hear 2 beeps and the battery level indicator flashes
green to indicate that the Easy-start feature has been activated.
To deactivate Easy-start: Press and hold the power on/off button for
,
2 seconds. You hear 1 beep and the battery level indicator flashes
yellow to indicate that the Easy-start feature has been deactivated.
Note: Each of the first 14 brushings must be at least 1 minute in length to
properly move through the Easy-start ramp-up cycle.
Note: Using the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces Sonicare's effectiveness in removing plaque.
Cleaning
Do not clean the brush head, handle or charger in the dishwasher.
Toothbrush handle
1 Remove the brush head and rinse the metal shaft area with warm
water (Fig. 11).
Do not push on the rubber seal on the metal shaft with sharp objects,
as this may cause damage.
2 Use a damp cloth to wipe the entire surface of the handle.
ENGLISH
11