Table of Contents
Advertisement
6. Once the "AP" is displayed you need to turn the knob counter
Figure7
clockwise until "PS" is displayed. After the "PS" is displayed press the
Start/Pause button.
7,
Once the Start/Pause button is pressed the "PS" will start to blink.
Once it starts blinking the phone will automatically start to connect.
Figure 8
8. After the "PS" is displayed, press the Temp & Start/Pause buttons
simultaneously for 3 seconds. Please wait until the Smart Control
Enabled icon [ _
] starts blinking. If the Smart Control enabled icon
starts blinking, press and hold the Signal on/oft button for 3 seconds
to activate the Smart Control. If the Smart Control is enabled, the
Smart Control enabled icon [ _
] is turned on.
9. Press the washer name tab to connect to the washer.
8ca sl_
52 wasl!"_ nga oad of aund_'_y
WF455AG-03159A-07
EN.indd
52
2013-12-I3
11:51:33
Advertisement
Table of Contents
