Table of Contents
Advertisement
Electrical system
7. SENSORS
Checking the functioning of the indicator lights.
Temperature and oil indicator:
Checking these requires making a bridge to earth with each cable corresponding to the
graphic for the instrument panel.
Turn indicators indicator:
To check the turn indicators indicator light, connect the green cable to earth and the
brown to positive.
Main beam indicator:
Connect the indicator's yellow /white cable to the magneto's yellow AC cable.
Neutral sensor
To check this sensor, the circuit should be checked between the terminal and earth.
With the gearbox in neutral, it should register
On selecting a gear the meter should register
Chassis
0Ω
∞
(Infinito)
63
Advertisement
Table of Contents
Need help?
Do you have a question about the MRT 50 and is the answer not in the manual?