Coolant; Renewing Coolant - RIEJU MRT 50 Chassis Workshop Manual

Familiarising yourself with the moped
Chassis

COOLANT

Check
1. Remove the cap (A/F-12) with the engine cold, first allowing the residual pressure to
escape.
2. Check the level of coolant with engine cold, because this level varies according to the
temperature of the engine. The level of coolant should cover the panel of the radiator.
3. If the level is lower, add coolant.
4. Replace the cap.
A
F-12

RENEWING COOLANT

Before carrying out this operation, place a container under the pipe.
1. Stand the machine on a flat surface and place a container under the radiator.
2. Drain the cooling circuit using the drain screw (A/F-13).
If a larger quantity of liquid than usual is required to reach the level indicated, or if it is ne-
cessary to make replenishments too frequently, check the entire cooling circuit.
A
F-13
23