Table of Contents
Advertisement
Introduction
Chassis
Never use naked flames under any circumstances.
Never leave open and unsuitable containers containing petrol where others are passing,
close to heat sources, etc.
Never use petrol as a cleaner to clean down the machine or to wash the workshop floor.
Clean the various components with detergent with a low flammability rating.
Never suck or blow into the petrol supply pipe.
Never carry our soldering or welding in the presence of petrol. Remove the fuel tank
even if it is completely empty, and disconnect the negative cable (-) from the battery.
Never leave the moped with the engine running in closed or poorly aired
spaces.
Before carrying out any work, make sure the moped is perfectly stable.
F-4
11
Advertisement
Table of Contents
Need help?
Do you have a question about the MRT 50 and is the answer not in the manual?