In This Package - Emerson HC1100 Installation, Care & Use Manual

HC1100
GN1100
H990
HOW TO USE THIS INSTRUCTION MANUAL
These instructions are separated into
main sections, indicated by numbers,
and subsections, indicated by capital
letters. The manual is setup this way
to allow you to take a break at any
point after completing a section or
subsection without affecting the
installation process.
Provides a step-by-step narrative describing the installation step, with check boxes that
1
can be marked as you progress through the installation.
2 Contains simple illustrations that provide visual instruction to support the narrative.
3 CAUTIONS, WARNINGS and DANGERS that will require your attention during the step.
An imminently hazardous situation, which, if not avoided, will result in death or serious injury.
A potentially hazardous situation, which, if not avoided, could result in death or serious injury.
A potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.

IN THIS PACKAGE

"Y" Quick Connector Rubber O-Ring
Quick Connector
Semi-circular
(1-2 Supplied)
Mounting Plate
Rubber O-Ring 19mm Screws (4)
Quick Connector
Semi-circular
(1-2 Supplied) Mounting Plate
Semi-circular
Wing Nut
Mounting Plate
1
B
2
Property Damage: Check to make sure
9.5mm White Tubes (2)
19mm Screws (4)
John Guest Fitting
(Australia Only)
Hex Nut
John Guest Fitting
(Australia Only)
19mm Screws (2)
Rubber Gasket
2
3
tubes are connected properly and are
pushed in as far as possible.
Hex Nut
Hex Tool Filter System
9.5mm White Tubes (2)
Hex Tool Filter System
John Guest Fitting
I I
Slip the clear tube over the far right
smooth fitting and slide down
approximately 12mm. (3)
I I
Visually check for pinched or
crimped tubes.
3
1
3