Summary of Contents for Emerson insinkerator H-HOT100C-1
Page 1
471 Mountain Highway H-HOT100SN-1 Bayswater Vic 3153, Australia The Emerson logo is a trademark and a service mark of Emerson Electric Co. Sales Tel: 61 03 9720 5599 InSinkErator may make improvements and/or changes in the specifications Service Tel: 1 300 136 205...
Page 2
We are delighted that you have chosen the InSinkErator steaming hot water tap ® HOW TO USE THIS INSTRUCTION MANUAL to be a part of your home. This unique appliance will save you time and effort in the kitchen, and you’ll enjoy discovering new uses for it each day. That’s exactly why millions of people are now using an InSinkErator steaming hot water tap.
COMPONENTS IN THIS PACKAGE START HERE PREPARATION Identify locations for the tap, tank and filter (if applicable). Required minimum from Check to make sure counter is center of hole to wall 51mm thick or less. 51mm Make sure there is a grounded electrical outlet under the sink.
MOUNTING THE TANK INSTALLING THE TAP Unpack tap components. Select a spot under the sink to mount tank vertically within reach On a firm, flat surface, carefully Tank must be of both plumbing and electrical straighten the copper tubing using mounted level connections.
Page 5
FINAL WATER CONNECTION INSTALLING FILTRATION (UK) At the other end of the white Mark hole locations for filter head tube from the filter, install a 9.5mm Wall mount and bracket in a spot that allows for clip connection to the water supply. filter replacement.
IMPORTANT SAFETY INFORMATION IMPORTANT SAFETY INFORMATION Use this water heater only for its intended use as described in this manual. Property Damage: To reduce the risk associated with property damage due to water This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental leakage or flooding, and to ensure optimal performance: NOTICE capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction...
FILTER GUIDE AND REPLACEMENT This warranty is provided by InSinkErator, a business unit of Emerson Electric Co., (“InSinkErator” or “Manufacturer” or “we” or “our” or “us”) to the original consumer owner of the InSinkErator product with which this warranty is provided (the Factory temperature pre-set approx.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE WHAT TO DO Water and steam • Unit is boiling. • Depress the tap button to release some water from the tank. spits forcefully from spout • Adjust water temperature using dial on tank front. May be normal during initial set-up. without turning Remember that at higher altitudes, water boils at on the tap.
Need help?
Do you have a question about the insinkerator H-HOT100C-1 and is the answer not in the manual?
Questions and answers