FINALIZING THE INSTALLATION
SEASONAL HEAT DUMP
This fireplace insert has been manufactured with a heat dump damper located at the inside top of firebox. This allows infinite control
over amount of heat emitted into living areas without affecting flame height.
INSTALLER:
Please install this fireplace insert with heat dump in closed position.
HOMEOWNER: This fireplace insert has been installed with heat dump in closed position and will operate at its peak efficiency at this
setting. The heat dump may be opened as much as necessary to maintain desired heat level.
CAUTION: DO NOT ATTEMPT ADJUSTMENT IF FIREPLACE HAS BEEN IN OPERATION. ALLOW AMPLE TIME TO COOL OR USE
APPROPRIATE PROTECTION TO AVOID SERIOUS BURNS AND / OR PROPERTY DAMAGE.
Remove cast door* and glass frame assembly. Open or close heat dump as desired. Re-install glass frame assembly and cast door*.
*Breckenridge only
Shown in closed position
Shown in partial open position
PAGE 28