Clutch Operation; Assembly Overview - Clutch Engagement - Volkswagen Golf 2013 Workshop Manual

2

Clutch operation

⇒ "2.1 Assembly overview - clutch engagement", page 25
⇒ "2.2 Removing and installing clutch engagement", page 26
⇒ "2.3 Adjusting clutch engagement", page 29
2.1

Assembly overview - clutch engagement

1 - Shim for "K 1"
❑ Determining thickness
⇒ page 29 .
2 - Large engaging lever for "K
1"
❑ With engagement bear‐
ing
❑ Removing and installing
⇒ page 26 .
3 - Hinge mounting
❑ For large engaging lever
"K 1"
❑ Cannot be renewed.
4 - Small engagement bear‐
ings for "K 2"
5 - Shim for "K 2"
❑ Determining thickness
⇒ page 29 .
6 - Upper section of bushing
❑ Small small engaging
lever "K 2"
❑ Is removed and installed
together with small en‐
gaging lever and lower
section of bushing
7 - Small engaging lever for "K
2"
❑ Is removed and installed
together with upper and
lower section of bushing
❑ Removing and installing
⇒ page 26 .
8 - Ball pin
❑ Small small engaging lever "K 2"
❑ Removing and installing
9 - Bolt
❑ Always renew after removing.
❑ 8 Nm +90°
10 - Lower section of bushing
❑ Small small engaging lever "K 2"
❑ Is removed and installed together with small engaging lever and upper section of bushing
7-speed dual clutch gearbox 0CW - Edition 10.2012
⇒ page 30 .
Golf 2013 ➤
25
2. Clutch operation