Using Mio Fuse; Mio Fuse Touchpoints; All-Day Mode - Mio Fuse Complete User Manual

7. On your phone, go to Settings > Bluetooth and ensure your phone is not connected
to your Mio device. If it is connected, select all paired devices and select "Forget this
device."
8. Open the Mio GO app. From the top left menu, select "Help" then "Firmware
Update."
9. Select your Mio device and update – this may take up to 5 minutes. You will receive a
message when the firmware update has been complete.
10. If the update takes longer than 5 minutes, force close Mio GO and repeat.
Your Mio FUSE is now ready to use! For assistance in setting up your device, please visit
mioglobal.com/support.

USING MIO FUSE

Important: Wash Mio FUSE regularly with mild soap and water. As Mio FUSE is designed
to be worn all day, regular cleaning is necessary to prevent skin irritation. Make sure you
allow both your arm and Mio FUSE to dry completely before resuming wear.

Mio FUSE Touchpoints

Mio FUSE is a touch-operated device. Navigate screens and features by tapping on the Touchpoints.
Note: To prevent accidental triggering of the device, the Touchpoints are only active when your arm
is in a horizontal position, parallel to the ground.

All-Day Mode

In All-Day Mode, Mio FUSE tracks and displays your daily accumulated steps, calories,
distance, and goal progress. Your activity in Workout Mode is included in these totals. The
values are reset to 0 at midnight each day. Note: calories continue to be counted even during
sleep so calorie count will not be 0 when you wake up.
In All-Day Mode, tap any Touchpoint to turn on the display. Tap
screens. The default screens are: time, calories, steps, and goal progress. You can customize
which screens to display and also set your target goal through the Mio GO app. See Setup for
more information.
Mio FUSE User Guide
B C
or to scroll through the
06