Pride Icon Owner's Manual page 33

V I I . C O M F O R T A D J U S T M E N T S
POWER SEAT (OPTIONAL)
Your scooter may be equipped with a power seat. The power seat actuator is designed to raise or lower the
seat automatically with minimal effort on the part of the operator. See figure 18.
WARNING! The power seat is intended for operation only while your scooter is stationary
and on a level surface. Its purpose is to aid you in reaching objects.
Strict adherence to the following safety rules is vital to your safety:
!
Do not attempt to raise or lower the seat while in motion!
!
Operate the power seat only on level ground.
!
Do not operate your scooter with the power seat elevated.
!
It is recommended that the scooter be driven only with the seat in the lowest position.
PROHIBITED! Do not raise or lower the power seat when travelling or when on an incline,
as doing so could cause the scooter to tip over resulting in personal injury and/or product
damage. Keep the power seat in its lowest position when traveling or when on an incline.
Operating your power seat:
1. Ensure your scooter is level and stationary.
2. Toggle on the power seat switch located on the control con-
sole assembly.
3. To raise the power seat, place your hands on the handgrips
and use your thumb to push the right side of the throttle con-
trol lever.
4. Release the throttle control lever when you have attained your
desired height.
5. To lower the power seat, place your hands on the handgrips
and use your thumb to push the left side of the throttle control
lever.
6. Release the throttle control lever when you have attained your
desired height.
7. Ensure your seat is in the lowest position and toggle off the
power seat switch before you attempt to drive your scooter
again.
Icon www.pridemobility.com
Figure 18. Power Seat Actuator
33