Pride Icon Owner's Manual page 37

I X . C A R E A N D M A I N T E N A N C E
NYLON LOCK NUT REPLACEMENT
Any nylon insert lock nut removed during the periodic maintenance, assembly or disassembly of the scooter
must be replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the
nylon insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware
stores or through your authorised Pride Dealer.
STORING YOUR SCOOTER
If you plan on not using your scooter for an extended period of time, it is best to:
! Fully charge its batteries prior to storage.
! Disconnect both battery harnesses.
! Store your scooter in a warm, dry environment.
! Avoid storing your scooter where it will be exposed to temperature extremes.
WARNING! Always protect batteries from freezing temperatures and never charge a frozen
battery. This damages the battery and can cause personal injury.
For prolonged storage, you may wish to place several boards under the frame of your scooter to raise it off
of the ground. This takes the weight off the tyres and reduces the possibility of flat spots developing on the
areas of the tyres contacting the ground.
DISPOSAL OF YOUR SCOOTER
Your scooter must be disposed of according to applicable local and national statutory regulations. Contact
your local waste disposal agency or authorised Pride Dealer for information on proper disposal of packag-
ing, metal frame components, plastic components, electronics and batteries.
Icon www.pridemobility.com
37