7 ADJUSTMENTS (BASE UNIT)
If your unit has below symptoms, adjust or confirm each item using remedy column from the table.
The base unit does not respond to a call from handset.
The base unit does not transmit or the transmit frequency is off.
The transmit frequency is off.
The transmit power output is low, and the operating distance between the base unit and
the handset is less than normal.
The reception sensitivity of base unit is low with noise.
The transmit level is high or low.
The reception level is high or low.
The unit does not link.
*: Refer to Adjustment (P.20).
7.1.
Test Mode Flow Chart (Base Unit)
The operation-flow of Test mode and main check items are shown below.
Note:
**: Refer to the above table.
Symptom
19
KX-TC2106UAB / KX-TC2106UAS / KX-TC2106UAT / KX-TC2106UAW
Remedy*
Make adjustments in item (A)
Make adjustments in item (B)
Make confirmation in item (C)
Make adjustments in item (D)
Make confirmation in item (E)
Make confirmation in item (F)
Make confirmation in item (G)
Make confirmation in item (H)