5
Disassembly and Reassembly
5-1-3. Duct type (Low silhouette)
No
Parts
1
Filter-Pre
1) Disassemble screws of indication part and
2) Turn the Plate Handle by hand when
3) When pulling the Filter-Pre handle,
Blower
1) After disassembling places indicating
2
&
Duct
Procedure
then assemble the direction of
2 Plate-Handle places by use of screw
as shown in 2).
removing the Filter-Pre.
the Filter-pre can be assembled.
Be sure to remove the cushion on the
marked part after initial installation.
(It cause the damage of noise).
screws, detach Ass'y Cover Bottom.
- 94 -
Remark