Main Address Setup; Rmc Address Setup - Samsung DVM Series Service Manual

4-3-2. Specification 2
Spec 2 model can set max. 40 the indoor unit address.
SW01

MAIN ADDRESS SETUP

1. The main switch(SW01,SW02) is a basic address for the communication between indoor unit and outdoor unit.
The products operate normally when this address is set.
2. The address is set from 00 to 39 by the combination of SW1 and SW2.
It is impossible to have a same address from 0 to the last.
3. Before the installation of indoor unit, mark the address of indoor unit onto the drawing for address setup.
SW01
0, 1, 2 ~ 9
0, 1, 2 ~ 9

RMC ADDRESS SETUP

1. SW03 RMC switch is an address setup switch to control the indoor unit operation by the wired remote control and
centralized controller.
2. If the wired remote control and centralized controller is used, SW03 K1, K2 switch setup should be needed.
3. SW03 RMC switch setup is not needed when the wired remote control and centralized controller is not used.
N
ote • PCB type may be different according to the model.
SW02 RMC
Indoor unit
SW02
Address
00 ~ 09
10 ~ 19
- 63 -
K1 K2 K3 K4
K5 K6 K7 K8
K9 K10
SW04 SW05 SW06
Indoor unit
SW01 SW02
Address
0, 1, 2 ~ 9
0, 1, 2 ~ 9
Installation
20 ~ 29
30 ~ 39