The Sel Channel Windows - Yamaha M7CL Quick Start Manual

Hide thumbs Also See for M7CL:

Table of Contents

Dragging a rotary knob.

To set the value of a rotary knob click on the knob and

drag it round. The knob will reach an end-stop just like

an analogue knob.

Tip;

Tip; For greater accuracy you can click on the knob,

drag the pointer out along the radius of a circle and

then turn the knob as if it was a giant knob with this

radius. This can be especially useful when using tablet

control. Alternatively, type a value into the text box

above the knob.

The SEL channel windows;

Main and Additional

In the M7CLV3 Editor there are two SEL channel windows; Main View and Additional View. Both views can appear

the same, they differ in how their displayed channel is selected.

Note also the main view can access the libraries from buttons within the window, but these are greyed out in the

additional view.

The selection of the Main View is by the [SEL] buttons, but the Additional View selection is either by using the ar-

rows to increment and decrement the channel or by clicking on the [Select] bar to produce a drop down box of all

the channels to choose from.

For now it doesn't matter which SEL channel you use, the Main View is probably a little easier, and it has the library

short-cuts, but later when connected on-line to the console you may want to decide if you need the Studio Manager

to show the same SEL channel as the console or a different SEL channel. The real purpose of the Additional view is

to provide a second independent control of the mixer when on-line.

M7CL Quick Start Guide Part 3

Drag out,

then turn

Table of Contents