Switching Off The Dishwasher; Unloading The Dishwasher; Half Load - Currys Essentials CDW45W10 Installation Instructions Manual

Switching off the Dishwasher

To save energy, please remember to switch the dishwasher off using the On/Off button. The dishwasher
will continue to use electricity until it is switched off with the On/Off button.
If the dishwasher is not going to be used for a long period of time, e.g. on holiday, please
disconnect the dishwasher from the mains supply.

Unloading the Dishwasher

Allowing dishes to cool down before unloading is important because dishes tend to break and chip more
easily when they are hot. Therefore, if you open the dishwasher door fully after switching off this will allow
the dishes to cool down much faster.
We suggest:
Unload the lower basket first, followed by the cutlery basket and then the upper basket.
This will prevent water drops from the upper basket from falling on to the dishes in the lower basket.

Half Load

In case you do not have enough dishes for a full load, the half load option can be selected for washing. This
will save hot water and electricity usage. Please follow the steps below.
1. Open the dishwasher door and load your soiled dishes and crockery.
2. Close the door.
3. Close the dishwasher door and then press the ON/OFF button to turn on the dishwasher.
4. Select your preferred programme.
5. Press the 1/2 button.
6. Press the Start/Reset button ,the unit will start the programme shortly.
19