Temperature Recorder (Option) - Sanyo MDF-C2156VAN Instruction Manual

TEMPERATURE RECORDER (OPTION)

4. Pass a recorder sensor through the inside of the
freezer in the hole (It is blocked with the rubber stopper
and the insulation in this hole. Remove it first.) for the
recorder sensor. (Fig. 4)
5. Pass a recorder sensor through the inside of the
freezer, and use the inside clip of the recorder sensor
cover, and fix a recorder sensor with a screw. After that,
a sticker is to have a gap in the recorder sensor hole
with a silicone caulking material. (Fig. 5)
6. Fix a recorder sensor cover with 2 screws. (Fig. 3)
7. The rest of the sensor tubes are to be banded with lead wire fixed part together before the sensor hole.
(Fig. 4) After that, fix it with 4 screws as the Fig. 1.
8. Check that setup temperature is the same as chamber temperature of the freezer.
After that, record indication temperature of the recorder and the freezer internal temperature indication of
the control panel. Adjust it to freezer internal indication temperature with a zero adjustable screw of the
recorder when indication temperature of the recorder and freezer internal temperature indication deviate.
Recorder
sensor
hole
Rubber
cork
Silicone
caulking
Clip
Temperature
recorder
sensor
37
Fig.4
Fig. 5