Notes On Using The - Sony DSC-RX1RM2 How To Use Manual

In dark environments, use the flash to light up the subject while shooting and to prevent
camera-shake. When shooting against the sun, use the flash to lighten the image of the
backlit subject.
1. Attach the flash (sold separately) to the product.
2. Press the shutter button fully down.
Note
You cannot use the flash when recording movies.
While charging the flash,
light up.
Before attaching/removing an accessory such as a flash to/from the Multi Interface Shoe,
turn off the product first.
When attaching an accessory, insert it fully to the Multi Interface Shoe and screw tightly.
Also, make sure that the accessory is fixed securely to the product.
If you raise the flash with the viewfinder up, the flash may make contact with the
viewfinder. Be careful when doing so.
Do not use a commercially available flash with high-voltage synchro terminals or with
reverse polarity.
[50] How to Use
Notes on using the flash
When using the flash, note the following points.
You cannot use the flash when recording movies.
While charging the flash, the
flashes. After charging is completed, the flashing icon will
Using shooting functions
indicator flashes. When the charging of the flash is
Using the flash