Table of Contents
Advertisement
[42] How to Use
Memory recall
Allows you to shoot an image after recalling often-used modes or camera settings registered
in advance.
1. Set the mode dial to 1, 2 or 3 (Memory recall).
2. Press
on the center of the control wheel.
Note
Register shooting settings in advance by [Memory].
If you set [Memory recall] after completing the shooting settings, the registered settings
are given priority and the original settings may become invalid. Check the indicators on
the screen before shooting.
[43] How to Use
Movie
You can adjust the shutter speed or aperture value to your desired settings for recording
movies. You can also check the image angle before shooting.
1. Set the mode dial to
2. MENU →
When [Mode Dial Guide] is set to [On], you can select the desired settings after you
have changed the position of the mode dial.
3. Press the MOVIE (movie) button to start recording.
Press the MOVIE button again to stop recording.
Menu item details
Program Auto:
Allows you to shoot with the exposure adjusted automatically (both the shutter speed and
the aperture value).
Shooting
Selecting a shooting mode
Shooting
Selecting a shooting mode
(Movie).
(Camera Settings) → [Movie] → desired setting.
Advertisement
Table of Contents
