Table of Contents
Advertisement
3. Press the button to which the [In-Camera Guide] function is assigned.
The operation guide for the MENU item you have selected in step 2 is displayed.
If you press the
in gray, the reason the item cannot be set is displayed.
Note
Assign the [In-Camera Guide] function to a button in advance using the [Custom
Key(Shoot.)].
[12] How to Use
Charging the battery pack using a charger
When using the camera for the first time, be sure to charge the battery pack. The charged
battery pack is discharged little by little, even when you do not use it. To avoid missing an
opportunity to shoot, charge the battery pack again before you shoot.
1. Insert the battery pack into the battery charger.
Slide the top cover of the battery charger to open it, and then insert the battery pack
until it clicks by aligning the
charger.
2. Slide the top cover of the battery charger to close it.
3. Connect the battery charger to the AC Adaptor (supplied) using the micro USB cable
(supplied), and connect the AC Adaptor to a wall outlet (wall socket). Alternatively, you
can charge the battery from a computer by connecting the battery charger to a USB jack
on a computer connected to a power source.
on the center of the control wheel after selecting an item shown
Preparing the camera
Charging the battery pack
marks (A) on both the battery pack and the battery
Advertisement
Table of Contents
