Additional Recording; Delete A Track; Delete A Song - Kurzweil Mark-Pro 3i Owner's Manual

Additional Recording

Supposed that you want to record track no 2, after you're finished recording track 1 :
1.
2.
3.
4.
5.
6.
Re-record a track
If you record to a track that contains recorded data, the newly record track will overwrite the old
ones. So If you want to re-record a track, just activate the old track and record.

Delete a track

To delete a track on which something is recorded, you simply record "nothing" over it; that is,
you select the track for recording, start and stop the Recorder, but don't play any notes or touch
any controllers while recording. This deletes the entire track.

Delete a song

To delete a recorded song, press the [Song] button to select.
Then press the [Record] button and the [Play/Stop] button simultaneously.
A message will be displayed as shown below and all the Track buttons will turn off.
This will delete the entire song.
Play/Stop
Press the [Play/Stop] button to start playback or recording, or to stop it.
If you press the [Play/Stop] button while in record stand-by mode recording will start
immediately. If you select a track; contains recorded data and press the [Play/Stop] button, the
Mark Pro 3i will play the track.
Select a program for the new track.
Press the [Record] button to get into record stand-by mode.
Press the [Track 2] button to select track no.2.
When you are ready to record, press the [Play/Stop] button or a pedal or key to start record.
Press the [Record] button to finish recording.
Press [Play/Stop] button to listen to the recorded result.
Note : The deleted track can't be recovered.
Note : The deleted song can't be recovered.
Recorder 30