Side Panel And Pedal Box Assembly; Rear Panel Assembly - Kurzweil Mark-Pro 3i Owner's Manual

Side Panel and Pedal Box Assembly

Rear Panel Assembly

7 Setting up the instrument
1. Attach pedal box ④ to the left side panel ② and
fasten the screw ⑨.
2. Attach the right side panel ③ in the same
manner.
3. Take out the pedal cable from inside of the pedal
box ④.
1. Fit the rear panel ⑤ into the side panel brackets
and fasten the screws ⑩.
2. After fastening all two screws ⑩, fasten the 4
screws ⑪ to lock to the pedal box.