Mazda 3 2016 Manual page 342

Interior Features
Bluetooth
®
Bluetooth Preparation (Type A)
®
Bluetooth Hands-Free Preparation
®
Pairing code setting
The 4-digit pairing code setting for
registration of your cell phone (pairing)
can be set beforehand.
NOTE
The initial setting value is "0000".
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] "Setup"
3. Prompt: "Select one of the following:
Pairing options, con rmation prompts,
language, passcode, select phone or
select music player."
4. Say: [Beep] "Pairing options"
5. Prompt: "Select one of the following:
Pair, Edit, Delete, List, or Set Pairing
Code."
6. Say: [Beep] "Set pairing code"
7. Prompt: "Your current pairing code is
XXXX. Do you want to change it to a
different pairing code?"
8. Say: [Beep] "Yes"
9. Prompt: "Please say a 4-digit pairing
code."
10. Say: [Beep] "YYYY"
11. Prompt: "YYYY is this correct?"
12. Say: [Beep] "Yes" or "No"
13. If "Yes", go to Step 14. If "No", the
procedure returns to Step 9.
14. Prompt: "Your new pairing code is
YYYY. Use this pairing code when
pairing devices to the Hands free
system. Do you want to pair a device
now?"
15. Say: [Beep] "Yes" or "No"
16. If "Yes", the system switches to the
device registration mode. If "No", the
system returns to standby status.
5–80
Device pairing
To use Bluetooth Hands-Free, the device
®
equipped with Bluetooth
to the Bluetooth unit using the following
®
procedure.
A maximum of seven devices including
hands-free mobile phones and Bluetooth
audio devices can be paired to one vehicle.
NOTE
If a Bluetooth device has already been
®
paired to the vehicle as a Bluetooth
device, it does not need to be paired again
when using the device as a hands-free
mobile phone. Conversely, it does not need
to be paired again as a Bluetooth
device if it has already been paired as a
hands-free mobile phone.
1. Activate the Bluetooth
the device.
NOTE
For the operation of the device, refer to its
instruction manual.
2. Press the pick-up button or talk button
with a short press.
3. Say: [Beep] "Setup"
4. Prompt: "Select one of the following:
Pairing options, con rmation prompts,
language, passcode, select phone or
select music player."
5. Say: [Beep] "Pairing options"
6. Prompt: "Select one of the following:
Pair, Edit, Delete, List, or Set Pairing
Code."
7. Say: [Beep] "Pair"
8. Prompt: "Start the pairing process on
your Bluetooth device. Your pairing
®
code is 0000 (XXXX). Input this on
your Bluetooth device when prompted
®
on the device. See device manual for
instructions."
has to be paired
®
®
audio
®
audio
®
® application of