Mazda 3 2016 Manual page 144

When Driving
Instrument Cluster and Display
Outside Temperature Display
When the ignition is switched ON, the
outside temperature is displayed.
NOTE
Under the following conditions, the
outside temperature display may differ
from the actual outside temperature
depending on the surroundings and vehicle
conditions:
Signi cantly cold or hot
temperatures.
Sudden changes in outside
temperature.
The vehicle is parked.
The vehicle is driven at low speeds.
The outside temperature unit can be
switched between Celsius and Fahrenheit
using the following procedure.
1. Press the INFO button with the ignition
switched off and continue pressing the
INFO button for 5 seconds or longer
while switching the ignition ON. The
outside temperature display ashes.
2. Press the up or down
INFO switch to change the outside
temperature unit.
3. Press and hold the INFO button for 3
seconds or longer while the outside
temperature display is ashing. The
outside temperature display illuminates.
4–16
*Some models.
*
The vehicle speed preset using the cruise
control is displayed.
The following information can be selected
by pressing the up
the steering switch with the ignition
switched ON.
If you have any problems with your trip
computer, consult an Authorized Mazda
Dealer.
Distance-to-empty mode
This mode displays the approximate
distance you can travel on the remaining
fuel based on the fuel economy.
The distance-to-empty will be calculated
and displayed every second.
part of the
Cruise Control Set Vehicle Speed
Display
*
Trip Computer and INFO Switch
or down
Distance-to-empty
Average fuel economy
Current fuel economy
Average vehicle speed
*
part of