Mazda 3 2016 Manual page 350

Interior Features
Bluetooth
®
4. Rotate the audio control dial and select
the name of the paired device you
would like to delete.
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
NOTE
Only the names of paired devices can be
displayed. If only one device is paired,
only the name for this device is displayed.
5. If a selection other than " GO BACK "
is made and the audio control dial is
pressed, " SURE ? NO " is displayed.
6. Rotate the audio control dial clockwise
and switch the display to " SURE ?
YES ".
NOTE
The display changes as follows depending
on whether the audio control dial is
rotated clockwise or counterclockwise.
-Clockwise: " SURE ? YES " displayed
-Counterclockwise: " SURE ? NO "
displayed
7. Press the audio control dial to delete
the selected device.
5–88
NOTE
Select " GO BACK " and press the audio
control dial to return to the " PAIR
DELETE " display.
8. " PAIR DELETED " is displayed for
three seconds after the deletion is
completed, and then it returns to the
normal display.
NOTE
If an error occurs while trying to delete
the paired device, " Err " ashes in the
display for three seconds and the display
returns to " LINK DELETE ".
Bluetooth audio device information
®
display
1. Using the audio control dial, select the
pair device information display mode
"DEVICE INFO" in the "BT SETUP"
mode. (Refer to "Bluetooth
device set-up" for details.)
2. Press the audio control dial to
determine the mode.
3. The name of the Bluetooth
is displayed.
4. Rotate the audio control dial to select
the information for the Bluetooth
which you would like to view.
NOTE
When " GO BACK " is selected and the
audio control dial is pressed, the display
returns to " DEVICE INFO ".
audio
®
® unit device
unit
®
Device name
BT address