Lindy 38049 User Manual page 3

User Manual
Introduction
Thank you for purchasing the LINDY 4K HDMI 4x2 Matrix with remote control. This high performance HDMI Matrix
allows any of the attached four sources to be show on any of the two displays simultaneously. An Infra-red remote
control is supplied to make switching between sources and displays easier.
Package Contents

HDMI 4x2 4K Matrix

5V DC 1A Multi Country PSU

Remote control

This manual
Features

Supports display resolutions up to 4Kx2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz

3D HDMI 1.4a video format support

3D video support including Frame Packing for all 3D formats up to a 297MHz TMDS clock

Supports deep colour up to 48-bit per pixel

HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT)

Supports the reception of any audio data conforming to the HDMI specification 1.4 such as LPCM at up to
192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR

Full colorimetric including sYCC601, Adobe RGB, Adobe YCC601,xvYCC extended gamut colour

Operates for TMDS clock frequencies up to 300MHz
Specification

Input Ports: 4 x HDMI Female

Output Ports: 2 x HDMI Female

Power Supply: 5V DC 1A

Dimensions: 85 x 192 x 26mm (WxDxH)

Weight: 450g

Operating Temperature: 0°C ~ 40°C / 32°F ~ 104°F

Storage Temperature: -20°C ~ 60°C / -4°F ~ 140°F

Relative Humidity: 20 ~ 90% RH (Non-condensing)

Power Consumption: 5W Max
Operation
Front Panel
1. ON/OFF: Power on/off switch
2. POWER LED: This red LED illuminates when the device is connected with a power supply
3. IR IN: Remote control signal receive
4. OUTPUT A: Press this button to select the input source to HDMI OUT A. The LED will illuminate to show
the input selected
5. OUTPUT B: Press this button to select the input source to HDMI OUT B. The LED will illuminate to show
the input selected
6. EDID Selector: Use the chart below to select the EDID format for the signal out
English