Basic Operation; Turning The Radio On - Ericsson EDACS DPE-100 User Manual

TURNING THE RADIO ON

The display illumination comes on. All the status
indicators and all the segments in the alphanumeric and
numeric fields in the display will flash 3 times.
The radio's LID number is displayed briefly.
Own Logical ID
A battery level indicator is shown in the upper right
corner of the display. This can be a value from B0 to B5
in proportion to the battery's voltage level. You can read
more about this in the chapter Batteries and Recharg-
ing .
Once service is available from an EDACS system, the
SERV (Service) indicator comes on, together with a
signal strength meter and the CC SCAN goes off in the
display. This meter indicates the relative signal strength
by displaying from 0 to 5 "bars" ,with the number of bars
being proportional to the signal strength.

BASIC OPERATION

Turn the radio on by holding down the
key until you hear a beep.
System Indicator Battery Level Indicator
-
7