Table of Contents
Advertisement
Important Safety Information
Safety Labels
Your Zero Turn Mower comes equipped with all safety labels in
place. They were designed to help you safely operate your
implement. Read and follow their directions.
1.
Keep all safety labels clean and legible.
2.
Refer to this section for proper label placement. Replace
all damaged or missing labels. Order new labels from your
nearest Land Pride dealer. To find your nearest dealer,
visit our dealer locator at www.landpride.com.
3.
Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
4
ZST40 & ZST48 Zero Turn Mowers 357-505M
Table of Contents
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4.
Refer to this section for proper label placement.
To install new labels:
a.
Clean surface area where label is to be placed.
b.
Spray soapy water onto the cleaned area.
c.
Peel backing from label and press label firmly onto the
surface.
d.
Squeeze out air bubbles with edge of a credit card or
with a similar type of straight edge.
818-543C
33169
Danger: Guard Missing
(Beneath Seat Platform)
838-303C
Danger: Battery
33169
(Beneath Seat Platform)
838-829C
Caution: Do Not Power Wash
33170
12/15/15
Advertisement
Table of Contents
