Intel D875PBZ Quick Reference page 11

Hide thumbs Also See for D875PBZ:

Table of Contents

Enlarged version

Desktop Board D875PBZ has an integrated AGP card retention mechanism

(RM). Follow these instructions to install an AGP card (see Figure 5):

Observe the precautions in "Before You Begin" on page 3.

Place the AGP card in the AGP connector.

Press down on the card until it is completely seated in the connector and the

card retention notch snaps into place below the RM.

Secure the card's metal bracket to the chassis back panel with a screw.

Install PCI cards into the PCI bus add-in card connectors on the desktop board.

Figure 5. Installing an AGP Card

To remove the AGP card, reverse steps taken when installing an AGP card.

Before removing the card, make sure to push back on the RM lever (A) until the

retention pin completely clears the notch in the card.

Intel Desktop Board D875PBZ Quick Reference

OM14695

Table of Contents