Makita BGD800 Instruction Manual
Cordless die grinder
Hide thumbs
Also See for BGD800:
- User manual ,
- Instruction manual (57 pages) ,
- Technical information (10 pages)
Related Manuals for Makita BGD800
Summary of Contents for Makita BGD800
- Page 1 INSTRUCTION MANUAL Cordless Die Grinder BGD800 BGD801 011465 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model BGD800 BGD801 Collet capacity 1/4", 6 mm and/or 8 mm Max. wheel point diameter 38 mm No load speed (no) / Rated speed (n) 25,000 (min Overall length 402 mm 307 mm Net weight 2.0 kg 1.7 kg... - Page 3 Personal safety and any other condition that may affect the 10. Stay alert, watch what you are doing and use power tool’s operation. If damaged, have the common sense when operating a power tool. Do power tool repaired before use. Many not use a power tool while you are tired or under accidents are caused by poorly maintained power...
- Page 4 Operations such as sanding, wire brushing, spinning accessory may grab the surface and pull polishing or cutting-off are not recommended the power tool out of your control. to be performed with this power tool. Operations Do not run the power tool while carrying it at for which the power tool was not designed may your side.
- Page 5 ENC007-7 Safety Warnings Specific for Grinding: a) Use only wheel types that are recommended IMPORTANT SAFETY for your power tool. INSTRUCTIONS b) Wheels must be used only for recommended applications. For example: do not grind with FOR BATTERY CARTRIDGE the side of cut-off wheel. Abrasive cut-off wheels are intended for peripheral grinding, side forces Before using battery cartridge, read all applied to these wheels may cause them to shatter.
-
Page 6: Functional Description
Switch action FUNCTIONAL DESCRIPTION 1. Slide switch CAUTION: Always be sure that the tool is switched off and the • battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1. Button 2. Red part 011466 3. -
Page 7: Operation
Battery cartridge replacing signal OPERATION When the remaining battery capacity gets small, the indicator lamp lights up during operation earlier than enough capacity battery use. Accidental re-start preventive function Even if the battery cartridge is inserted on the tool with the slide switch in the "I (ON)" position, the tool does not start. -
Page 8: Optional Accessories
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Wheel points • Side handle (accessory) Collet cone (3 mm, 6 mm, 8 mm, 1/4", 1/8") •... - Page 12 Makita Corporation www.makita.com 884992A9...