Removing The Engine From The Vehicle - Beta Enduro RR 350 EFI 2016 Workshop Manual

1
1

REMovING tHE ENGINE fRoM tHE vEHICLE

Front engine guard fixing screw.
Back engine guard fixing screws.
3
Screw 2 for draining motor oil and 3 for draining
gear oil.
6
1
1
2
4
Carefully wash the vehicle
Before removing the engine from the vehicle, empty
the following liquids:
•
Motor oil;
•
Gear/clutch unit oil;
•
Coolant.
In order to access the oil drain plug, remove the
engine guard connected to the frame by means of
the three screws 1.
Remove the screw 2 to empty the motor oil. Remo-
ve the screw 3 to empty the gear oil.
ATTENTION: Used oil contains dangerous substan-
ces which are harmful for the environment. When
changing it, you must be equipped to dispose of it
in compliance with existing law.
Avoid releasing used oils to the environment.
Remove the exhaust pipe and the silencer.
Drain the cooling system through screw 4 and let
the liquid outflow into a container (the cooling cir-
cuit contains 1.3l of liquid).
Remove the radiator cap.