Crossfire - ATI Technologies Radeon X1600 Series User Manual

88 CrossFire™

An email is created containing the error report for submission to ATI
Technologies.
Note: No personal information is included in the error report.
Apply your settings
1
Click Apply to save your changes and leave the Catalyst™ Control
Center open.
2
Click OK to save your changes and exit the Catalyst™ Control
Center.
Restore default settings
1
Move the mouse to the bottom right-hand corner of the window.
2
Click Defaults.
Note: Clicking Defaults will restore the defaults for the current view
only. Previous settings are not altered and will be saved once you
click OK.
Discard your settings
• Click Discard to ignore any unsaved changes and restore the
settings that existed when the Catalyst™ Control Center was
opened or the last time Apply was used. Discard does not close the
Catalyst™ Control Center.
Clicking Discard applies to all features of an aspect, not just the feature in
the current view.
CrossFire™
Use CrossFire™ to combine the power and performance of two or more
Visual Processing Units to drive a single display. Harness the power of a
dual PCI Express® based computer to deliver up to twice the VPU
performance when using 3D graphics applications.
The CrossFire™ aspect requires the following to be present:
• a motherboard with two PCI Express® X16 slots
• a CrossFire™ Edition Series graphics card
Note: CrossFire™ is supported in Catalyst™ version 5.13.