ATI Technologies Radeon X1600 Series User Manual page 18

10 Advanced Installation: AGP
Power Cable Connector
4
4-Pin Power Connection
5
Power Extension Cable: Power Connector to Graphics Card
6
Power Extension Cable: Power Connector to Hard Drive
7
Power Extension Cable: Power Connector to Power Supply
8
Hard Drive
9
Power Connector to Hard Drive
10
Installing the Radeon® graphics card
1
Turn off the computer, monitor, and other peripheral devices.
2
Unplug the computer's power cord and disconnect all cables from the
back of your computer.
WARNING
power cord before disconnecting a peripheral or removing a
component from the motherboard to avoid possible damage to the
motherboard.
3
Remove the computer cover.
If necessary, consult your computer's manual for help in removing
the cover.
WARNING
touching the power supply or the metal surface of the computer
chassis.
4
Unscrew or unfasten and remove any existing graphics card from
your computer.
Note: If your computer has an on-board graphics capability, you may
need to disable it on the motherboard. For more information, see your
computer documentation.
5
Locate the appropriate slot and, if necessary, remove the metal back-
plate cover.
- Wait approximately 20 seconds after unplugging the
- Remember to discharge your body's static electricity by