Maintenance Parts; Checking Replaceables - Muratec Multi Functional Printer MFX-C2500 User Manual

MAINTENANCE PARTS

To avoid print quality and paper feed problems resulting from worn parts,
and to maintain your machine in top working condition the following
condition, the following items will need to be replaced after the specified
number of pages, or when the life span of each item has expired.
ITEMS
Fuser unit
DADF friction pad
DADF pick-up roller
Pick-up roller (Multi-purpose tray,
a
FCF , Optional tray 2)
Friction pad (Multi-purpose tray,
FCF, Optional tray 2)
a. First cassette feeder (Tray1)
We highly recommend that this maintenance be performed by an authorized
service provider, dealer or the retailer where you bought the machine. The
warranty does not cover the replacement of the maintenance parts after
their lifespan.

Checking replaceables

If you experience frequent paper jams or printing problems, check the
number of pages the machine has printed or scanned. Replace the
corresponding parts, if necessary.
1. Press Menu until System Setup appears on the bottom line of the
display and press OK.
2. Press the left/right arrow until Maintenance appears and press OK.
3. Press the left/right arrow until Supplies Life appears and press OK.
4. Press the left/right arrow until the item you want appears and press OK.
• Supplies Info: Prints the supply information page.
• Total: Displays the total number of pages printed.
• ADF Scan: Displays the number of pages scanned using the ADF.
• Platen Scan: Displays the number of pages scanned using the
scanner glass.
• Transfer Belt, Fuser, Tray1 Roller, Tray2 Roller, MP Tray
Roller: Displays the number of pages printed each item.
5. If you selected to print a supply information page, press OK to confirm.
6. Press Stop/Clear to return to ready mode.
68 _Maintenance
YIELD (AVERAGE)
Approx. 100,000 pages
Approx. 20,000 pages
Approx. 80,000 pages
Approx. 70,000 pages
Approx. 70,000 pages
Replacing the DADF rubber pad
You will need to replace the DADF (or ADF) rubber pad when there seems to be
a consistent problem with paper pickup or when its specified yield is reached.