Denon AVR-1705 Operating Instructions Manual page 8

ENGLISH
Connecting the video component equipped with Color Difference
(Component - Y, P /C , P /C
R R B
• When making connections, also refer to the operating instructions of the other components.
• The signals input to the color difference (component) video jacks are not outputs to the VIDEO output jack
(yellow) or the S-Video output jack.
• Some video sources with component video outputs are labeled Y, C
terms all refer to component video color difference output.
Connecting a DVD player
DVD IN jacks
• Connect the DVD player's color difference (component) video output jacks
DVD player
COMPONENT
(COMPONENT VIDEO OUTPUT) to the COMPONENT DVD IN jack using 75
VIDEO OUT
B
Y C C Ω/ohms coaxial video pin-plug cords.
B R
• In the same way, another video source with component video outputs such as a
TV/DBS tuner, etc., can be connected to the TV/DBS color difference (component)
video jacks.
Monitor TV
COMPONENT
VIDEO IN
Y C C
B R
8
) Video jacks
B
, C or Y, Pb, Pr or Y, R-Y, B-Y. These
B R
Connecting a monitor TV
MONITOR OUT jack
• Connect the TV's color difference (component) video input jacks (COMPONENT
VIDEO INPUT) to the COMPONENT MONITOR OUT jack using 75 Ω/ohms
coaxial video pin-plug cords.
• The color difference input jacks may be indicated differently on some
TVs, monitors or video components ("C , C
R B
Y", "Pr, Pb and Y", etc.). For details, carefully read the operating
instructions included with the TV or other component.
Connecting the antenna terminals
FM INDOOR
ANTENNA
(An Accessory)
75 Ω/ohms
COAXIAL
CABLE
AM LOOP
ANTENNA
(An Accessory)
and Y", "R-Y, B-Y and
AM loop antenna assembly
1 2
Remove the vinyl tie
and take out the
connection line.
4
a. With the
antenna on top
any stable
surface.
Mount
b. With the antenna
attached to a
wall.
Installation hole Mount on wall, etc.
DIRECTION OF
BROADCASTING
STATION
FM
ANTENNA
Connection of AM antennas
Connect to the AM
1. Push the lever.
antenna terminals.
3
Bend in the reverse
direction.
NOTES:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not
disconnect the AM loop antenna.
• Make sure AM loop antenna lead terminals do
not touch metal parts of the panel.
AM OUTDOOR
ANTENNA
GROUND
2. Insert the 3. Return the
conductor. lever.