Denon AVR-1705 Operating Instructions Manual page 25

Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1
Select the input source.
Playback with a digital input
q Select an input source set to digital
(COAXIAL/OPTICAL) (see page 15).
Example: DVD
(Main unit) (Remote control unit)
w Set the input mode to "AUTO" or DTS.
(Main unit) (Remote control unit)
2
Select the STANDARD (Dolby/DTS Surround)
mode.
(Main unit) (Remote control unit)
3
Operate the SURROUND BACK button to
switch Surround Back CH ON/OFF.
(Main unit) (Remote control unit)
• Lights when the Surround
Light
Back CH is on.
4
Play a program source with the ,
mark.
• The Dolby Digital indicator lights
DIGITAL
Light when playing Dolby Digital
sources.
• The DTS indicator lights when
Light
playing DTS sources.
1 1 4
3 2 5 6
2
1
5
7
6 6
3
1
5
Set the surround parameter according to the
source.
(Main unit) (Remote control unit)
• The mode switches as shown below each
time the button is pressed.
CINEMA EQ
D.COMP.
LFE
TONE DEFEAT
SURROUND BACK
DEFAULT
If you do want the bass and trable to be
adjusted, turn off the tone defeat mode.
NOTE:
• Please make sure the "AUDIO" position of
the slide switch on the remote control unit.
6
Set the various surround parameters.
• CINEMA EQ setting
CINEMA EQ OFF
ON OFF
or or
• D. COMP. setting
D.COMP. OFF
OFF LOW MID HIGH
or or
NOTE:
• This parameter is displayed during DOLBY
DIGITAL playback.
• LFE setting
LFE 0dB
-10dB -5dB 0dB
or or
ENGLISH
• TONE DEFEAT setting
TONE DEF. ON
ON OFF
or or
• SURROUND BACK SPEAKER setting
SB : MTRX ON
MTRX ON NON MTRX
or or
NOTE:
• This parameter is displayed during DOLBY
DIGITAL playback.
• DEFAULT setting
DEFAULT Y/N
YES NO
or or
Select "Yes" to reset to the factory defaults.
7
Press the ENTER button to finish surround
parameter mode.
(Remote control unit)
NOTE:
• When making parameter settings, the display
will return to the regular condition several
seconds after the last button was pressed and
the setting will be completed.
OFF
25