Denon AVR-1705 Operating Instructions Manual page 14

ENGLISH
Setting the Test Tone
• Use this setting to adjust to that the playback level between the different channel is equal.
• From the listening position, listen to the test tones produced from the speakers to adjust the level.
• The level can also be adjusted directly from the remote control unit. (For details, see page 21.)
1
• Use the
• Press the ENTER or
setting.
15 T.TONE
2
Use the
T.TONE
Press the
• Auto:
Adjust the level while listening to the test tones produced automatically from the
different speakers.
• Manual:
Select the speaker from which you want to produce the test tone to adjust the
level.
3
Use the
AUTO-FL
Press the
4
Use the
AUTO-C
Press the
14
(left) button to switch the Test Tone mode.
(down) button to switch to the DIGITAL input (COAX)
<YES
(left) and (right) buttons to select the Test Tone mode.
(Initial)
AUTO MANUAL
AUTO
(left) button (right) button
(down) button to start Test Tone.
(left) and (right) buttons to set the front L channel level.
(Initial)
-12dB 0dB
(left) button (right) button
(down) button to switch to the center channel level (manual mode).
(left) and (right) buttons to set the center channel level.
(Initial)
-12dB 0dB
(left) button (right) button
(down) button to switch to the front R channel level (manual mode).
5
6
7
8
+12dB
9
+12dB
Use the (left) and (right) buttons to set the front R channel level.
-12dB
AUTO-FR
(left) button (right) button
Press the (down) button to switch to the surround R channel level (manual
mode).
Use the (left) and (right) buttons to set the surround R channel level.
-12dB
AUTO-SR
(left) button (right) button
Press the (down) button to switch to the surround back channel level
(manual mode).
Use the (left) and (right) buttons to set the surround back channel level.
-12dB
AUTO-SB
(left) button (right) button
Press the (down) button to switch to the surround L channel level (manual
mode).
Use the (left) and (right) buttons to set the surround L channel level.
-12dB
AUTO-SL
(left) button (right) button
Press the (down) button to switch to the subwoofer channel level (manual
mode).
Use the (left) and (right) buttons to set the subwoofer channel level.
-12dB
AUTO-SW
(left) button (right) button
Press the ENTER button to finish the Test Tone.
(Initial)
0dB +12dB
(Initial)
0dB +12dB
(Initial)
0dB +12dB
(Initial)
0dB +12dB
(Initial)
0dB +12dB