Denon AVR-1705 Operating Instructions Manual page 23

5
Select the optimum mode for the source.
• When the "SURROUND BACK" parameter is set to "ON". (Set "S. BACK" at
system set up to "SMALL" or"LARGE".)
(Pro Logic
(Main unit)
Cinema mode)
• When the "SURROUND BACK" parameter is set to "OFF". (Set "S. BACK"
at system set up to "NONE"".)
(Remote control unit)
(Pro Logic
Cinema mode)
6
Set the surround parameters according to the mode.
• The mode switches as shown below each time the button is pressed.
MODE CINEMA
CINEMA EQ
(Main unit)
TONE DEFEAT
SURROUND BACK
DEFAULT
(Remote control unit)
If you do want the bass and trable to be adjusted, turn off the tone defeat
mode.
7
Set the various surround parameters.
• CINEMA EQ setting
CINEMA EQ OFF
ON OFF
or or
• PANORAMA setting
PANORAMA OFF
ON OFF
or or
• DIMENSION setting
DIMENSION 3
0 3 6
or or
• CENTER WIDTH setting
CENTER WIDTH 3
0 4 7
or or
II x (Pro Logic II x (Pro Logic II x
Music mode) Game mode)
or or
II (Pro Logic II (Pro Logic II (Dolby Pro Logic
mode)
Music mode) Game mode)
or or
MODE MUSIC MODE GAME MODE Dolby PL
TONE DEFEAT TONE DEFEAT CINEMA EQ
SURROUND BACK SURROUND BACK TONE DEFEAT
PANORAMA DEFAULT SURROUND BACK
DIMENSION DEFAULT
CENTER WIDTH
DEFAULT
• TONE DEFEAT setting
TONE DEF. ON
ON OFF
or or
• SURROUND BACK SPEAKER setting
SB : ON
ON OFF
or or
• D.COMP. setting
D.COMP. OFF
OFF LOW MID
or or
NOTE:
• This parameter is displayed during DOLBY
DIGITAL playback.
• LFE setting
LFE
-10dB -5dB
or
NOTE:
• This parameter is displayed during DOLBY
DIGITAL playback.
8
Press the ENTER button to finish surround parameter mode.
(Remote control unit)
NOTE:
• When making parameter settings, the display will return to the regular condition several seconds after the
last button was pressed and the setting will be completed.
DTS NEO:6 mode
1
Select the function to which the component you
want to play is connected.
Example: DVD
(Main unit)
2
Select the DTS NEO:6 mode.
(Main unit)
• The mode switches as shown below each
time the button is pressed.
DOLBY PL II
DTS NEO:6
3
Play a program source.
HIGH
• DEFAULT setting
0dB DEFAULT
0dB YES
or or
Select "Yes" to reset to the factory defaults.
1
(Remote control unit)
2
1
(Remote control unit)
x cinema
8
5, 7
ENGLISH
Y/N
Y/N NO
or
2 4, 6 5, 7
The DTS NEO:6 Cinema or
Music mode can be chosen
directly by pressing the
CINEMA or MUSIC button
on the remote control unit
during playback in the DTS
NEO:6 mode.
4, 6
5, 7
23