OPTIONAL KIT PARTS
2 Wheel Type
Handle Installation
Install the right and left handles on the generator upper frame using
the brackets and 4 flange bolts.
Wheel Kit Installation
1.
Install the two wheels on the axle shaft using the washers and cotter
pins.
2.
Install the axle assembly on the generator using four 8
flange bolts and 8 mm flange nuts.
3.
Install the two stands on the under frame using four 8
flange bolts.
TORQUE:
24 29 N·m (2.4 3.0 kgf·m , 17 22 lbf·ft)
−
LEFT UPPER HANDLE ASSY
LEFT HANDLE BRACKET
8 16 mm FLANGE BOLT (4)
×
20 mm WASHER (2)
WHEEL (2)
STAND (2)
−
8 16 mm FLANGE BOLT (4)
×
RIGHT UPPER
HANDLE ASSY
8 mm FLANGE NUT (4)
−
LONGER
RIGHT HANDLE BRACKET
8 16 mm FLANGE BOLT (4)
×
4.0 30 mm COTTER PIN (2)
×
AXLE
×
16 mm
×
16 mm
GENERATOR
SIDE
55