Keypad Functions - First Alert FA2000C Installation And Setup Manual

FA2000C Installation and Setup Guide

Keypad Functions

The keypad, if used, allows the user to silence alarm and trouble sounders and perform other system functions, such as
bypassing zones, and display zone descriptors. Zone and system conditions (alarm, trouble, bypass) are displayed in the
Display Window. The system is in the "System Normal" condition when all zones are intact. If NOT, faulted zones will
be displayed in numerical order.
System Commands
The following is a brief list of system commands. For detailed information concerning system functions, refer to the
User's Manual.
Silencing Sounders
Resetting Smoke Detectors and Clearing
Alarm Memory
Bypassing Zones (installer only function)
Un-bypassing Zones (installer only function)
Fire Walk Test Mode
Fire Drill Mode
Emergency Keys
The emergency keys are not programmed or used.
Fixed-Word Keypad Displays
The following is a brief list of fixed-word keypad displays. For detailed information concerning fixed-word keypad
displays, refer to the User's Manual.
Display Description
FC Fail Communication – A message to the central station (alarm, trouble, etc.) was not properly received.
Site Initiated Download – A site initiated download occurred.
CC
Open Circuit – The keypad has lost communication with the control panel.
OC
dF Fire Drill – Displays while the Fire Drill test is in progress.
CF Fire Walk Test Mode - Displays while the Fire Walk Test is in progress
Program Mode Communicating – Displays while the system communicates the Program Mode Entry/Exit
AA
message to the central station.
8-2
Summary of System Commands
Code + [OFF] or press Silence/Reset button
Code + [OFF] or press Silence/Reset button Twice
Code + [BYPASS] + Zone number(s)
Code + [BYPASS] + Zone Number(s)
Installer Code + [#] + [68]
Installer or User 2 Code + [#] + [69]
To exit, Code + [OFF]
To exit, Code + [OFF]