Adjust System Settings; Turn Beep Sound On/Off; Turn Demo Mode On/Off; Dimmer - Philips cem1100 User Manual

7 Adjust system
settings

Turn beep sound on/off

Each time you press a button, the unit beeps.
You can turn off/on this beep sound.
1
Press MENU.
2
Press or repeatedly until [BEEP] is
displayed.
3
Rotate to select a setting:
[BEEP ON]: Turn on the beep sound.
[BEEP OFF]: Turn off the beep sound.

Turn demo mode on/off

1
Press MENU.
2
Press or repeatedly until [DEMO] is
displayed.
» The screen shows current Demo
mode setting.
3
Rotate to select a setting:
[DEMO ON] : Turn on the demo
mode. When the unit is idle for more
than 10 seconds, all functions are
displayed.
[DEMO OFF] : Turn off the demo
mode.

Dimmer

1
Press MENU.
2
repeatedly until [DIMMER]
Press or
is displayed.
3
Rotate to select a setting:
[DIMM HIGH] (dimmer high)
[DIMM LOW] (dimmer low)
18 EN

Dance

You can turn on or off the spectrum on the
LCD display.
1
Press MENU.
2
repeatedly until [DANCE] is
Press or
displayed.
3
Rotate to select a setting:
[DANCE ON] : Turn on the spectrum.
[DANCE OFF] : Turn off the
spectrum.

Rear Aux

1
Press MENU.
2
repeatedly until [TEL MUTE]
Press or
is displayed.
3
Rotate to select a setting:
[NORMAL] : Mute the telephone,
[MUTE] is displayed.
[REAR AUX] : Mute the telephone,
[PHONE IN] is displayed.
Note
To support telephone call with this unit, connect TEL
MUTING wire to your hands-free kit and audio out
jack to the REAR AUX in jack of the unit.

Reset

You can reset the unit to its default setting.
1
Detach the front panel. (see 'Detach the
front panel' on page 19)
2
Press the reset button by using a ball-point
pen or a similar tool.
» Preset adjustments such as preset
channels and sound adjustments are
erased.