Troubleshooting - Philips cem1100 User Manual

WMA sampling frequencies: 32 kHz,
44.1 kHz, 48 kHz
WMA Bit-rates: 32~192 (kbps),
variable bit rates
Directory nesting up to a maximum
of 8 levels
Number of albums/ folders: CD
maximum 99
maximum 999 (depending on number
of album)
ID3 tag v2.0 or later
Unsupported formats:
Empty albums: an empty album is an
album that does not contain MP3/
display.
For example, Word documents (.doc)
ignored and not played.
.m4p, .mp4, .aac)

10 Troubleshooting

Caution
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/support). When you contact
Consumer Care, ensure that your apparatus
is nearby and the model number and serial
number are available.
No power or no sound.
Car engine is not on. Turn the car engine
on.
Cable is not correctly connected. Check
connections.
Fuse is burnt. Replace fuse.
Volume is too low. Adjust volume.
If the above solutions cannot help, press
the RESET button.
Ensure that the track played is of a
compatible format.
Noise in broadcasts.
Signals are too weak. Select other stations
with stronger signals.
Check the connection of the car antenna.
Change broadcast from Stereo to mono.
Cannot play disc
Ensure that the disc label is inserted with
the printed side facing up.
from the centre to the edge in a straight
line.
This disc may be defective. Play another
disc.
EN
21