Intended use When disposing of batteries, follow the instructions given This Black & Decker tool has been designed to project laser in the section “Protecting the environment”. lines to aid in DIY applications. This tool is intended for Do not incinerate the batteries. consumer use only.
Refit the cover and let it click into place. Adjusting the laser line (fig. B - E) Installing the tool (fig. B - E) Using a wall set-up (fig. E) The tool can be installed on a horizontal surface such as a floor Switch the tool on.
Please visit our website www.blackanddecker.co.uk to Technical data register your new Black & Decker product and to be kept up to BDL210S-XE date on new products and special offers. Further information Voltage on the Black & Decker brand and our range of products is Battery size available at www.blackanddecker.co.uk...
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. 09 579 7600 81 Hugo Johnston Drive Fax 09 579 8200 Penrose, Auckland, New Zealand 477524-01 03/05...
Please, turn your attention
By pressing 'print' button you will print only current page. To print the manual completely, please, download it.