Fujitsu ScanSnap ix100 Basic Operation Manual page 50

Example: When a USB Cable is Used for Connection
a The [Scan/Stop] button flashes in blue. The button returns to being lit normally when
document scanning is enabled.
In addition, the ScanSnap Manager icon in the notification area changes from
ATTENTION
With some computers, the initialization of the ScanSnap may be performed several times when
the computer is started up.
HINT
l It may take more time for the ScanSnap Manager icon in the notification area to change to
depending on computer performance, operating environment, or loading, for example,
when many software programs are running at the same time.
l When the ScanSnap is turned on, a notification informs you of the ScanSnap's
communication status.
To disable notifications of the ScanSnap's communication status, change the setting in the
following procedure:
1. Right-click the ScanSnap Manager icon
[Preferences] from the
a The [ScanSnap Manager - Preferences] window appears.
2. Clear the [Notify of the communication status] checkbox in the [Status Display] list.
in the notification area and select
"Right-Click Menu" (page
50
Turning the ScanSnap On or Off
45).
to .