Activate/Deactivate Vibration; F3Ci Operations Manual - Minelab F3Ci Operation Manual

F3Ci Operations Manual

4.3.3 Activate/Deactivate Vibration

The detector incorporates a vibration feature to give an operator a
tactile response during the detection of a target. When the detector
is first switched on the vibration is deactivated. To activate vibration
press and hold the Mode Select button and then press the Noise
Cancel button. Once activated release both buttons. To deactivate
the vibration, repeat the process.
NOTE
Vibrations, if activated, will not occur during the test piece procedure.
27