Minelab F3Ci Operation Manual page 12

F3Ci Operations Manual
6
7
Figure 5: Guide to unfolding and adjusting the F3Ci
NOTE
When the Handle Assembly is locked into position (Frame 3), it will
also lock the Upper Shaft in position. To unlock the Handle Assembly
and to allow the Upper Shaft to rotate when repacking the detector,
gently but firmly impact the base of the palm against the top of the
handle behind the LED display.
f. Extend the Lower and Middle Shafts to suit the selected demining
position as shown in Figure 6.
8
A
10
B