Server Module Features - Dell PowerEdge 1855 Systems User Manual

Table 1-1. System Status Features
Indicator Type Icon Indicator
System power N/A None
button
System power Off
indicator
Green
Amber
Identification N/A None
button
Identification Off
indicator
Amber, slow
blinking
Amber, fast
blinking
Server Module Features
Each server module has one power button and one KVM module selection button on the front (see Figure 1-3). The indicators include a power indicator,
network link indicators, and a KVM module indicator. The server module also has a custom port on the front of the module. Use the custom cable included with
your system to connect this port to two USB devices (for example, USB diskette drive, USB CD drive, USB mouse) and to video.
NOTE: The USB devices can only be connected by using the custom cable supplied with the system.
Figure 1-3. Server Module Indicators
Indicator Code
Turns the system on and off. Press to turn on the system. Press and hold to turn off the system. Hold briefly
to perform a graceful shutdown of the server modules.
NOTE: The system power button controls power to all of the server modules and I/O modules in the chassis.
System does not have power.
System power is on.
System is plugged in but is not turned on.
Turns on the identification indicators on both the front and back (on the KVM switch module) of the chassis.
Chassis is not being identified. This is the default.
Chassis is being identified. Either the front or back identification button has been pressed. This indicator can
be turned off by pressing the identification button.
System error. Will stop blinking when the error is resolved. See your Installation and Troubleshooting Guide for
more information.