Power Supply Indicator - Dell PowerEdge 1855 Systems User Manual

Figure 1-5. Back-Panel Features
Table 1-4. Back-Panel Features
Component
Power supply modules
Fan modules
KVM module
DRAC/MC module
PowerConnect™ 5316M Ethernet switch
module
Fibre Channel pass-through module
Fibre Channel switch module
Infiniband pass-through module
Gb pass-through module

Power Supply Indicator

Each hot-pluggable power supply has indicators that provide information about power status, fault, and the presence of AC power (see Figure 1-6).
lists the power supply indicator codes.
NOTICE: 2100-W power supply modules require 170-264 V to operate; 1200-W power supply modules (systems sold prior to April 2005) require 180–
264 V to operate. If they are plugged into 110-V electrical outlets, the power supply modules will not power up.
Figure 1-6. Power Supply Indicators
Table 1-5. Power Supply Indicator Codes
Indicator Description
Provide information about power status (see
Provide information about status of the system fans (see
Provides information about the KVM module (see
Provides information about system status, system management status, and port status (see
Module Features").
Provides information about the 10/100/100 BASE-T network status (see
Switch Module").
Provides information about the Fibre Channel network status (see
Provides information about the Fibre Channel network status (see
Provides information about the Infiniband network status (see
Provides information about the network status (see
"Power Supply Indicator Codes").
"Fan Module Indicators").
"KVM Modules").
"PowerConnect 5316M Ethernet
"Fibre Channel Pass-Through
"Fibre Channel Switch
"Infiniband Pass-through
"Gb Ethernet Pass-through
"DRAC/MC
Module").
Module").
Module").
Module").
Table 1-5