SGM IDEA SPOT 250 User Manual page 16

SGM Technology for Lighting
- Pan Reverse
With this function you can reverse the Pan-movement.
1. Select ''RPAN'' by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows ''ON'' or ''OFF''.
3. Press [UP] to select ''ON'' if you wish to enable this function or press [DOWN] button to ''OFF'' if you
don't.
4. Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
- Tilt Reverse
With this function you can reverse the Tilt-movement.
1. Select ''RTIL'' by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows ''ON'' or ''OFF''.
3. Press [UP] to select ''ON'' if you wish to enable this function or press [DOWN] button to ''OFF'' if you
don't.
4. Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
- Switch 16 bit/8 bit
With this function you can switch the device from 16 bit to 8 bit resolution.
1. Select ''16BI'' by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows ''ON'' or ''OFF''.
3. Press [UP] to select ''ON'' if you wish to enable this function or press ''DOWN'' button to ''OFF'' if
you don't.
4. Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
- Pan degree select
With this function you can select pan angle 630
1. Select "DEGR" by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows "630" or "540".
3. Press [UP] or [DOWN] button to select "630" or "540", the default is 630.
4. Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
- Dimmer speed select
With this function you can select dimmer speed "slow" and "fast".
1. Select "DIMM" by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows "SLOW" or "FAST".
3. Press [UP] or [DOWN] button to select "SLOW" or "FAST".
4. Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
-Mic sensitivity
With this function you can adjust the sensitivity of the microphone.
1. Select ''MIC'' by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows ''M-XX'', ''XX'' stands for the number from 0 to 99.
3. Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
-Automatic Run by no DMX
With this function you can automatic run the device by no DMX.
1. Select ''AUTO'' by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows "CLOS", "HOLD", "AUTO" or "AUDI".
3. Press [UP] or [DOWN] button to select "CLOS", "HOLD", "AUTO" or "AUDI", the default is "HOLD".
4. Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
- Fan's mode select
With this function you can select the Fan's mode.
Select "FANS" by pressing [UP] or [DOWN] button.
1.
Press [ENTER], the display shows "HIGH" or "AUTO".
2.
Select "HIGH" or "AUTO" by pressing [UP] or [DOWN] button.
3.
Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
4.
WIT070 V1.0-01NR
0 0.
or 540
14
GB
Idea Spot 250